888-628-5030
Contact Us
   
Home >> FACING >> LAYDOWN >> INSERTS >> LAYDOWN INDEXABLE TOOLHOLDERS
   
Seach within these results for:
Results
You searched for: LAYDOWN INDEXABLE TOOLHOLDERS
Results Displayed: 31 - 60 of 366
«   »Page Size:   Results Page:  1  2  3  4  5  6  7  8  9  10 »
Item IDDescriptionUOMQuantity
P50SIR1506522
30500062
STEEL IN-SHANK POLY Q-CHANGE HOLDER W-COOL FOR INT-RH LD INSERTS; SHANK:1.969"; OAL:2.559"(~65mm); NECK LEN:1.614"(~41mm); CUT D:.606"(~15.39mm); MN BORE:.984"(~24.99mm); SCRW:S22; KEY:K22; HOLDER:C5; ISO 26623, 1.4DEG TAPER SHANK, C5 EQ
P50SIR1707016
30500063
STEEL IN-SHANK POLY Q-CHANGE HOLDER W-COOL FOR INT-RH LD INSERTS; SHANK:1.969"; OAL:2.756"(~70mm); NECKLN:1.850"(~46.99mm); CUT D:.630"(~16mm); MN BORE:1.142"(~29.01mm); SCRW:S16; ANV/SCRW:AI16/A16; KEY:K16; HOLDER:C5; ISO 26623, 1.4DEG TAPER SHANK, C5 EQ
P50SIR1907022
30500066
STEEL IN-SHNK POLY Q-CHANGE HOLDER W-COOL FOR INT-RH LD INSERTS; SHNK:1.969"; OAL:2.756"(~70mm); NECKLN:1.850"(~46.99mm); CUT D:.705"(~17.91mm); MN BORE:1.142"(~29.01mm); SCRW:S22; ANV/SCRW:AI22/A22; KEY:K22; HOLDR:C5; ISO 26623, 1.4DEG TAPER SHNK, C5 EQ
P50SIR2209016
30500064
STEEL IN-SHNK POLY Q-CHANGE HOLDER W-COOL FOR INT-RH LD INSERTS; SHNK:1.969"; OAL:3.543"(~89.99mm); NECKLN:2.677"(~68mm); CUT D:.768"(~19.51mm); MN BORE:1.417"(~35.99mm); SCRW:S16; ANV/SCRW:AI16/A16; KEY:K16; HOLDR:C5; ISO 26623, 1.4DEG TAPER SHNK, C5 EQ
P50SIR2209022
30500065
STEEL IN-SHANK POLY Q-CHANGE HOLDER W-COOL FOR INT-RH LD INSERTS; SHANK:1.969"; OAL:3.543"(~89.99mm); NECKLN:2.677"(~68mm); CUT D:.843"(~21.41mm); MN BORE:1.496"(~38mm); SCRW:S22; ANV/SCRW:AI22/A22; KEY:K22; HOLDER:C5; ISO 26623, 1.4DEG TAPER SHANK, C5 EQ
P50SIR2710516
30500067
STEEL IN-SHANK POLY Q-CHANGE HOLDER W-COOL FOR INT-RH LD INSERTS; SHANK:1.969"; OAL:4.134"(~105mm); NECKLN:3.307"(~84mm); CUT D:.925"(~23.5mm); MN BORE:1.732"(~43.99mm); SCRW:S16; ANV/SCRW:AI16/A16; KEY:K16; HOLDER:C5; ISO 26623, 1.4DEG TAPER SHANK, C5 EQ
P50SIR2710522
30500068
STEEL IN-SHANK POLY Q-CHANGE HOLDER W-COOL FOR INT-RH LD INSERTS; SHANK:1.969"; OAL:4.134"(~105mm); NECK LEN:3.307"(~84mm); CUT D:1"(~25.4mm); MN BORE:1.811"(~46mm); SCRW:S22; ANV/SCRW:AI22/A22; KEY:K22; HOLDER:C5; ISO 26623, 1.4DEG TAPER SHANK, C5 EQ
P63SEL4506522
30600010
STEEL Q-CHANGE IN-SHANK POLYGONAL QUICK-CHANGE HOLDER W-COOL FOR EXT-LH LAYDOWN INSERTS; SHANK D: 2.480"; NECK LEN: 2.559" (~65mm); CUT D: 1.772" (~45.01mm); SCRW: S22; ANV/SCRW: AI22/A22; KEY: K22; HOLDER: C6; ISO 26623, 1.4-DEG TAPERED SHANK, C6 EQUIV
P63SER4506516
30600019
STEEL Q-CHANGE IN-SHANK POLYGONAL QUICK-CHANGE HOLDER W-COOL FOR EXT-RH LAYDOWN INSERTS; SHANK D: 2.480"; NECK LEN: 2.559" (~65mm); CUT D: 1.772" (~45.01mm); SCRW: S16; ANV/SCRW: AE16/A16; KEY: K16; HOLDER: C6; ISO 26623, 1.4-DEG TAPERED SHANK, C6 EQUIV
P63SER4506522
30600020
STEEL Q-CHANGE IN-SHANK POLYGONAL QUICK-CHANGE HOLDER W-COOL FOR EXT-RH LAYDOWN INSERTS; SHANK D: 2.480"; NECK LEN: 2.559" (~65mm); CUT D: 1.772" (~45.01mm); SCRW: S22; ANV/SCRW: AE22/A22; KEY: K22; HOLDER: C6; ISO 26623, 1.4-DEG TAPERED SHANK, C6 EQUIV
P63SIR1407016
30500069
STEEL IN-SHNK POLY Q-CHANGE HOLDER W-COOL FOR INT-RH LD INSERTS; SHNK:2.480"; OAL:2.756"(~70mm); NECK LEN:1.654"(~42.01mm); CUT D:.531"(~13.49mm); MN BORE:.984"(~24.99mm); SCRW:S16; ANV/SCRW:AI16/A16; KEY:K16; HOLDR:C6; ISO 26623, 1.4DEG TAPER SHNK, C6 EQ
P63SIR1707516
30500070
STEEL IN-SHNK POLY Q-CHANGE HOLDER W-COOL FOR INT-RH LD INSERTS; SHNK:2.480"; OAL:2.953"(~75.01mm); NECKLN:1.890"(~48.01mm); CUT D:.630"(~16mm); MN BORE:1.142"(~29.01mm); SCRW:S16; ANV/SCRW:AI16/A16; KEY:K16; HOLDR:C6; ISO 26623, 1.4DEG TAPER SHNK, C6 EQ
P63SIR1907522
30500071
STEEL IN-SHNK POLY Q-CHANGE HOLDER W-COOL FOR INT-RH LD INSRT; SHNK:2.480"; OAL:2.953"(~75.01mm); NECKLN:1.890"(~48.01mm); CUT D:.705"(~17.91mm); MN BORE:1.142"(~29.01mm); SCRW:S22; ANV/SCRW:AI22/A22; KEY:K22; HOLDR:C6; ISO 26623, 1.4DEG TAPER SHNK, C6 EQ
P63SIR2209016
30500072
STEEL IN-SHNK POLY Q-CHANGE HOLDER W-COOL FOR INT-RH LD INSRT; SHNK:2.480"; OAL:3.543"(~89.99mm); NECKLN:2.520"(~64.01mm); CUT D:.768"(~19.51mm); MN BORE:1.417"(~35.99mm); SCRW:S16; ANV/SCRW:AI16/A16; KEY:K16; HOLDR:C6; ISO 26623, 1.4DEG TAPER SHNK, C6 EQ
P63SIR2209022
30500073
STEEL IN-SHNK POLY Q-CHANGE HOLDER W-COOL FOR INT-RH LD INSERTS; SHNK:2.480"; OAL:3.543"(~89.99mm); NECKLN:2.520"(~64.01mm); CUT D:.843"(~21.41mm); MN BORE:1.496"(~38mm); SCRW:S22; ANV/SCRW:AI22/A22; KEY:K22; HOLDR:C6; ISO 26623, 1.4DEG TAPER SHNK, C6 EQ
P63SIR2710516
30500074
STEEL IN-SHNK POLY Q-CHANGE HOLDER W-COOL FOR INT-RH LD INSERTS; SHNK:2.480"; OAL:4.134"(~105mm); NECKLN:3.150"(~80.01mm); CUT D:.925"(~23.5mm); MN BORE:1.732"(~43.99mm); SCRW:S16; ANV/SCRW:AI16/A16; KEY:K16; HOLDR:C6; ISO 26623, 1.4DEG TAPER SHNK, C6 EQ
P63SIR2710522
30500075
STEEL IN-SHANK POLY Q-CHANGE HOLDER W-COOL FOR INT-RH LD INSERTS; SHANK:2.480"; OAL:4.134"(~105mm); NECK LEN:3.150"(~80.01mm); CUT D:1"(~25.4mm); MN BORE:1.811"(~46mm); SCRW:S22; ANV/SCRW:AI22/A22; KEY:K22; HOLDER:C6; ISO 26623, 1.4DEG TAPER SHANK, C6 EQ
P80SER5508022
30600021
STEEL Q-CHANGE IN-SHANK POLYGONAL QUICK-CHANGE HOLDER W-COOL FOR EXT-RH LAYDOWN INSERTS; SHANK D: 3.150"; NECKLN: 3.150" (~80.01mm); CUT D: 2.165" (~54.99mm); SCRW: S22; ANV/SCRW: AE22/A22; KEY: K22; HOLDER: C8; ISO 26623, 1.4-DEG TAPERED SHANK, C8 EQUIV
SEL0375D16
30400153
STEEL IN-SHANK HOLDER W-OUT COOL FOR EXT-LH 16mm (3/8" I.C.) LAYDOWN INSERTS; X-SECTION: 0.375" x 0.375"; OAL: 02.500" (~63.5mm); SCRW: S16; ANV/SCRW: AI16/A16; KEY: K16; 1.5-DEG HELIX
SEL0375H11
30400152
STEEL IN-SHANK HOLDER W-OUT COOL FOR EXT-LH 11mm (1/4" I.C.) LAYDOWN INSERTS; X-SECTION: 0.375" x 0.375"; OAL: 04.000" (~101.6mm); SCRW: S11; KEY: K11; 1.5-DEG HELIX
SEL0500F16
30400151
STEEL IN-SHANK HOLDER W-OUT COOL FOR EXT-LH 16mm (3/8" I.C.) LAYDOWN INSERTS; X-SECTION: 0.500" x 0.500"; OAL: 03.250" (~82.55mm); SCRW: S16; ANV/SCRW: AI16/A16; KEY: K16; 1.5-DEG HELIX
SEL0625H16
30400150
STEEL IN-SHANK HOLDER W-OUT COOL FOR EXT-LH 16mm (3/8" I.C.) LAYDOWN INSERTS; X-SECTION: 0.625" x 0.625"; OAL: 04.000" (~101.6mm); SCRW: S16; ANV/SCRW: AI16/A16; KEY: K16; 1.5-DEG HELIX
SEL0750K16
30400149
STEEL IN-SHANK HOLDER FOR EXT-LH 16mm (3/8" I.C.) LAYDOWN INSERTS; X-SECTION: 0.750" x 0.750"; OAL: 05.000" (~127mm); SCRW: S16; ANV/SCRW: AI16/A16; KEY: K16; 1.5-DEG HELIX
SEL0750K16D
30400148
STEEL DROPHEAD IN-SHANK HOLDER W-OUT COOL FOR EXT-LH 16mm (3/8" I.C.) LAYDOWN INSERTS; X-SECTION: 0.750" x 0.750"; OAL: 05.000" (~127mm); SCRW: S16; ANV/SCRW: AI16/A16; KEY: K16; 1.5-DEG HELIX
SEL0750K16U6
80102085
STEEL IN-SHANK HOLDER W-OUT COOL FOR EXT-LH 16Umm (3/8U" I.C.) LAYDOWN INSERTS; X-SECTION: 0.750" x 0.750"; OAL: 05.000" (~127mm); CUT D: 0.750" (~19.05mm); SCRW: S16; ANV/SCRW: AIR 16U6/A16; KEY: K16; 1.5-DEG HELIX, FOR INSERTS WITH 6-CUT EDGE
SEL0750K16V
30400147
STEEL VERTICAL IN-SHANK HOLDER W-OUT COOL FOR EXT-LH 16Vmm (3/8V" I.C.) LAYDOWN INSERTS; X-SECTION: 0.750" x 0.750"; OAL: 05.000" (~127mm); SCRW: S16S; KEY: K16; 1.5-DEG HELIX
SEL0750K16VS
30400174
STEEL VERTICAL SLIM-THROAT IN-SHANK HOLDER W-OUT COOL FOR EXT-LH 16Vmm (3/8V" I.C.) LAYDOWN INSERTS; X-SECTION: 0.750" x 0.750"; OAL: 05.000" (~127mm); SCRW: S16S; KEY: K16; 1.5-DEG HELIX
SEL0808H11
30400146
STEEL MET-SHANK HOLDER W-OUT COOL FOR EXT-LH 11mm (1/4" I.C.) LAYDOWN INSERTS; X-SECTION: 08.00mm x 08.00mm; OAL: 100.00mm (~3.94"); SCRW: S11; KEY: K11; 1.5-DEG HELIX
SEL1000M16
30400144
STEEL IN-SHANK HOLDER FOR EXT-LH 16mm (3/8" I.C.) LAYDOWN INSERTS; X-SECTION: 1.000" x 1.000"; OAL: 06.000" (~152.4mm); SCRW: S16; ANV/SCRW: AI16/A16; KEY: K16; 1.5-DEG HELIX
SEL1000M16B
30400193
STEEL (COATED) IN-SHANK HOLDER W-COOL BORE FOR EXT-LH 16mm (3/8" I.C.) LAYDOWN INSERTS; X-SECTION: 1.000" x 1.000"; OAL: 06.000" (~152.4mm); SCRW: S16P; ANV/SCRW: AI16/A16P; KEY: K16P; 1.5-DEG HELIX, COOL CON (4mm/6mm), STANDARD PACKING WITH 6mm COOL CON
 
«   »Page Size:   Results Page:  1  2  3  4  5  6  7  8  9  10 »
   
footer image

2075 State HWY 175
Richfield WI 53076
Toll-Free: 888.628.5030
Phone: 262.628.5030
Fax: 262.628.5302

Youtube LinkedIN   Carmex Precision Tools LLC. © All Rights Reserved.