888-628-5030
   
   
Seach within these results for:
Results
You searched for: LAYDOWN INDEXABLE TOOLHOLDERS
Results Displayed: 301 - 330 of 366
«   »Page Size:   Results Page: « 11  12  13 
Item IDDescriptionUOMQuantity
SIR0375K11
30100186
STEEL IN-SHANK HOLDER W-OUT COOL FOR INT-RH 11mm (1/4" I.C.) LAYDOWN INSERTS; SHANK D: 0.625"; OAL: 05.000" (~127mm); NECK LEN: 1.000" (~25.4mm); CUT D: 0.280" (~7.11mm); MN BORE: 0.470" (~11.94mm); SCRW: S11; KEY: K11; 1.5-DEG HELIX
SIR0375K11B
30100185
STEEL IN-SHANK HOLDER W-COOL BORE FOR INT-RH 11mm (1/4" I.C.) LAYDOWN INSERTS; SHANK D: 0.375"; OAL: 05.000" (~127mm); NECK LEN: 1.000" (~25.4mm); CUT D: 0.280" (~7.11mm); MN BORE: 0.470" (~11.94mm); SCRW: S11; KEY: K11; 1.5-DEG HELIX
SIR0375M11CB
30100184
CARBIDE IN-SHANK HOLDER W-COOL FOR INT-RH 11mm (1/4" I.C.) LAYDOWN INSERTS; SHANK D: 0.375"; OAL: 06.000" (~152.4mm); CUT D: 0.280" (~7.11mm); MN BORE: 0.470" (~11.94mm); SCRW: S11; KEY: K11; 1.5-DEG HELIX
SIR0500L11
30100183
STEEL IN-SHANK HOLDER W-OUT COOL FOR INT-RH 11mm (1/4" I.C.) LAYDOWN INSERTS; SHANK D: 0.625"; OAL: 05.500" (~139.7mm); NECK LEN: 1.250" (~31.75mm); CUT D: 0.340" (~8.64mm); MN BORE: 0.580" (~14.73mm); SCRW: S11; KEY: K11; 1.5-DEG HELIX
SIR0500M16
30100182
STEEL IN-SHANK HOLDER W-OUT COOL FOR INT-RH 16mm (3/8" I.C.) LAYDOWN INSERTS; SHANK D: 0.625"; OAL: 06.000" (~152.4mm); NECK LEN: 1.250" (~31.75mm); CUT D: 0.390" (~9.91mm); MN BORE: 0.640" (~16.26mm); SCRW: S16S; KEY: K16; 1.5-DEG HELIX
SIR0500M16B
30100181
STEEL IN-SHANK HOLDER W-COOL BORE FOR INT-RH 16mm (3/8" I.C.) LAYDOWN INSERTS; SHANK D: 0.620"; OAL: 06.000" (~152.4mm); NECK LEN: 1.250" (~31.75mm); CUT D: 0.390" (~9.91mm); MN BORE: 0.640" (~16.26mm); SCRW: S16S; KEY: K16; 1.5-DEG HELIX
SIR0500P11CB
30100179
CARBIDE IN-SHANK HOLDER W-COOL FOR INT-RH 11mm (1/4" I.C.) LAYDOWN INSERTS; SHANK D: 0.500"; OAL: 07.000" (~177.8mm); CUT D: 0.340" (~8.64mm); MN BORE: 0.580" (~14.73mm); SCRW: S11; KEY: K11; 1.5-DEG HELIX
SIR0500P16CB
30100067
CARBIDE IN-SHANK HOLDER W-COOL FOR INT-RH 16mm (3/8" I.C.) LAYDOWN INSERTS; SHANK D: 0.500"; OAL: 07.000" (~177.8mm); CUT D: 0.400" (~10.16mm); MN BORE: 0.640" (~16.26mm); SCRW: S16S; KEY: K16; 1.5-DEG HELIX
SIR0625P16
30100178
STEEL IN-SHANK HOLDER W-OUT COOL FOR INT-RH 16mm (3/8" I.C.) LAYDOWN INSERTS; SHANK D: 0.750"; OAL: 07.000" (~177.8mm); NECK LEN: 1.570" (~39.88mm); CUT D: 0.450" (~11.43mm); MN BORE: 0.750" (~19.05mm); SCRW: S16S; KEY: K16; 1.5-DEG HELIX
SIR0625P16B
30100177
STEEL IN-SHANK HOLDER W-COOL BORE FOR INT-RH 16mm (3/8" I.C.) LAYDOWN INSERTS; SHANK D: 0.625"; OAL: 07.000" (~177.8mm); NECK LEN: 1.570" (~39.88mm); CUT D: 0.450" (~11.43mm); MN BORE: 0.750" (~19.05mm); SCRW: S16S; KEY: K16; 1.5-DEG HELIX
SIR0625R16CB
30100176
CARBIDE IN-SHANK HOLDER W-COOL FOR INT-RH 16mm (3/8" I.C.) LAYDOWN INSERTS; SHANK D: 0.625"; OAL: 08.000" (~203.2mm); CUT D: 0.460" (~11.68mm); MN BORE: 0.750" (~19.05mm); SCRW: S16S; KEY: K16; 1.5-DEG HELIX
SIR0750P16
30100175
STEEL IN-SHANK HOLDER W-OUT COOL FOR INT-RH 16mm (3/8" I.C.) LAYDOWN INSERTS; SHANK D: 0.750"; OAL: 07.000" (~177.8mm); CUT D: 0.510" (~12.95mm); MN BORE: 0.900" (~22.86mm); SCRW: S16; ANV/SCRW: AI16/A16; KEY: K16; 1.5-DEG HELIX
SIR0750P16B
30100174
STEEL IN-SHANK HOLDER W-COOL BORE FOR INT-RH 16mm (3/8" I.C.) LAYDOWN INSERTS; SHANK D: 0.750"; OAL: 07.000" (~177.8mm); CUT D: 0.510" (~12.95mm); MN BORE: 0.900" (~22.86mm); SCRW: S16; ANV/SCRW: AI16/A16; KEY: K16; 1.5-DEG HELIX
SIR0750P16UB6
80102307
/contentonly.aspx?file=images/items/SIR0750P16UB6_t.* does not exist
STEEL IN-SHANK HOLDER W-COOL FOR INT-RH 16Umm(3/8U" I.C.) LD INSERTS; SHANK:.750"; OAL:7"(~177.8mm); CUT D:.570"(~14.48mm); MN BORE:.940"(~23.88mm); SCRW:S16; ANV/SCRW:AIR 16U6/A16; KEY:K16; 1.5DEG HELIX, FOR INSERTS WITH 6-CUT EDGE
SIR0750P22
30100173
STEEL IN-SHANK HOLDER W-OUT COOL FOR INT-RH 22mm (1/2" I.C.) LAYDOWN INSERTS; SHANK D: 0.750"; OAL: 07.000" (~177.8mm); CUT D: 0.590" (~14.99mm); MN BORE: 0.900" (~22.86mm); SCRW: S22S; KEY: K22; 1.5-DEG HELIX
SIR0750S16CB
30100172
CARBIDE IN-SHANK HOLDER W-COOL FOR INT-RH 16mm (3/8" I.C.) LAYDOWN INSERTS; SHANK D: 0.750"; OAL: 10.000" (~254mm); CUT D: 0.540" (~13.72mm); MN BORE: 0.900" (~22.86mm); SCRW: S16; ANV/SCRW: AI16/A16; KEY: K16; 1.5-DEG HELIX
SIR1000R16
30100171
STEEL IN-SHANK HOLDER W-OUT COOL FOR INT-RH 16mm (3/8" I.C.) LAYDOWN INSERTS; SHANK D: 1.000"; OAL: 08.000" (~203.2mm); CUT D: 0.650" (~16.51mm); MN BORE: 1.160" (~29.46mm); SCRW: S16; ANV/SCRW: AI16/A16; KEY: K16; 1.5-DEG HELIX
SIR1000R16B
30100170
STEEL IN-SHANK HOLDER W-COOL BORE FOR INT-RH 16mm (3/8" I.C.) LAYDOWN INSERTS; SHANK D: 1.000"; OAL: 08.000" (~203.2mm); CUT D: 0.650" (~16.51mm); MN BORE: 1.160" (~29.46mm); SCRW: S16; ANV/SCRW: AI16/A16; KEY: K16; 1.5-DEG HELIX
SIR1000R16UB6
80102309
STEEL IN-SHANK HOLDER W-COOL FOR INT-RH 16Umm(3/8U" I.C.) LD INSERTS; SHANK:1"; OAL:8"(~203.2mm); CUT D:.690"(~17.53mm); MN BORE:1.140"(~28.96mm); SCRW:S16; ANV/SCRW:AIR 16U6/A16; KEY:K16; 1.5DEG HELIX, FOR INSERTS WITH 6-CUT EDGE
SIR1000R22
30100169
STEEL IN-SHANK HOLDER W-OUT COOL FOR INT-RH 22mm (1/2" I.C.) LAYDOWN INSERTS; SHANK D: 1.000"; OAL: 08.000" (~203.2mm); CUT D: 0.710" (~18.03mm); MN BORE: 1.160" (~29.46mm); SCRW: S22; ANV/SCRW: AI22/A22; KEY: K22; 1.5-DEG HELIX
SIR1000R22B
30100113
STEEL IN-SHANK HOLDER W-COOL BORE FOR INT-RH 22mm (1/2" I.C.) LAYDOWN INSERTS; SHANK D: 1.000"; OAL: 08.000" (~203.2mm); CUT D: 0.710" (~18.03mm); MN BORE: 1.160" (~29.46mm); SCRW: S22; ANV/SCRW: AI22/A22; KEY: K22; 1.5-DEG HELIX
SIR1000S16CB
30100168
CARBIDE IN-SHANK HOLDER W-COOL FOR INT-RH 16mm (3/8" I.C.) LAYDOWN INSERTS; SHANK D: 1.000"; OAL: 10.000" (~254mm); CUT D: 0.640" (~16.26mm); MN BORE: 1.100" (~27.94mm); SCRW: S16; ANV/SCRW: AI16/A16; KEY: K16; 1.5-DEG HELIX
SIR1250S16
30100167
STEEL IN-SHANK HOLDER W-OUT COOL FOR INT-RH 16mm (3/8" I.C.) LAYDOWN INSERTS; SHANK D: 1.250"; OAL: 10.000" (~254mm); CUT D: 0.770" (~19.56mm); MN BORE: 1.400" (~35.56mm); SCRW: S16; ANV/SCRW: AI16/A16; KEY: K16; 1.5-DEG HELIX
SIR1250S16B
30100300
STEEL IN-SHANK HOLDER W-COOL BORE FOR INT-RH 16mm (3/8" I.C.) LAYDOWN INSERTS; SHANK D: 1.250"; OAL: 10.000" (~254mm); CUT D: 0.770" (~19.56mm); MN BORE: 1.400" (~35.56mm); SCRW: S16; ANV/SCRW: AI16/A16; KEY: K16; 1.5-DEG HELIX
SIR1250S22
30100166
STEEL IN-SHANK HOLDER W-OUT COOL FOR INT-RH 22mm (1/2" I.C.) LAYDOWN INSERTS; SHANK D: 1.250"; OAL: 10.000" (~254mm); CUT D: 0.850" (~21.59mm); MN BORE: 1.500" (~38.1mm); SCRW: S22; ANV/SCRW: AI22/A22; KEY: K22; 1.5-DEG HELIX
SIR1250S22B
30100302
STEEL IN-SHANK HOLDER W-COOL BORE FOR INT-RH 22mm (1/2" I.C.) LAYDOWN INSERTS; SHANK D: 1.250"; OAL: 10.000" (~254mm); CUT D: 0.850" (~21.59mm); MN BORE: 1.500" (~38.1mm); SCRW: S22; ANV/SCRW: AI22/A22; KEY: K22; 1.5-DEG HELIX
SIR1250S22U
30100165
STEEL IN-SHANK HOLDER W-OUT COOL FOR INT-RH 22Umm (1/2U" I.C.) LAYDOWN INSERTS; SHANK D: 1.250"; OAL: 10.000" (~254mm); CUT D: 0.950" (~24.13mm); MN BORE: 1.500" (~38.1mm); SCRW: S22; ANV/SCRW: AI22U/A22; KEY: K22; 1.5-DEG HELIX
SIR1250S27
30100164
STEEL IN-SHANK HOLDER W-OUT COOL FOR INT-RH 27mm (5/8" I.C.) LAYDOWN INSERTS; SHANK D: 1.250"; OAL: 10.000" (~254mm); CUT D: 0.880" (~22.35mm); MN BORE: 1.560" (~39.62mm); SCRW: S27; ANV/SCRW: AI27/A27; KEY: K27; 1.5-DEG HELIX
SIR1250S27U
30100163
STEEL IN-SHANK HOLDER W-OUT COOL FOR INT-RH 27Umm (5/8U" I.C.) LAYDOWN INSERTS; SHANK D: 1.250"; OAL: 10.000" (~254mm); CUT D: 1.000" (~25.4mm); MN BORE: 1.560" (~39.62mm); SCRW: S27; ANV/SCRW: AI27U/A27; KEY: K27; 1.5-DEG HELIX
SIR1250S27VT10
30400083
STEEL IN-SHANK HOLDER W-OUT COOL FOR INT-RH 27Vmm (5/8" I.C.) LAYDOWN INSERTS; SHANK D: 1.250"; OAL: 10.000" (~254mm); CUT D: 0.94" (~23.88mm); MN BORE: 1.65" (~41.91mm); SCRW: S27; KEY: K27;
 
«   »Page Size:   Results Page: « 11  12  13